Connecting To A 52-Pin 0.65Mm Pitch Lqfp Foot Pattern - Renesas R0E521000EPB00 User Manual

R0E521000EPB00 User's Manual

2.9.5 Connecting to a 52-pin 0.65mm pitch LQFP Foot Pattern

Figure 2.12 shows how to connect the emulation probe to a 52-pin 0.65mm pitch LQFP foot pattern on the user system with
the R0E521258CFJ00 (included with the R0E521258EPB00) and here following is its procedure.
For details on the R0E521258CFJ00, refer to the user's manual.
(1) Mount the NQPACK052SB included with the R0E521258CFJ00 to the user system.
(2) Attach the YQPACK052SB included with the R0E521258CFJ00 to the NQPACK052SB, and fix them with the YQ-
GUIDE's.
(3) Attach the J3 and J4 of the R0E521000EPB00 to the R0E521258CFJ00.
(4) Attach the R0E521258CFJ 00 to the YQPACK052SB.
Figure 2.12 Connecting to a 52-pin 0.65mm pitch LQFP foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter Board:
The small connectors of the R0E521000EPB00 and R0E521258CFJ00 are guaranteed for only 50
insertion/removal iterations.
Between R0E521258CFJ00 and the YQPACK052SB are guaranteed for only 100 insertion/removal iterations
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 34 of 88
R0E521000 EPB 00
(3)
YQ-GUIDE (x4)*
YQPACK 052 SB*
NQPACK 052SB *
● : No . 1 pin
*: These items are included with the R
IMPORTANT
R0E521258 CFJ 00
On-board evaluation
(4)
HQPACK 052SB
(not included )
FLASH version
(2)
52-pin 0.65mm pitch LQFP
(1)
(PLQP 0052 JA-A) foot pattern
0E521258 CFJ 00 package .
CAUTION
MCU
2. Setup