Renesas R0E521000EPB00 User Manual page 65

R0E521000EPB00 User's Manual
(2) Modifying the RAM monitor display area
1) RAM Monitor window
2) RAM monitor area setting window
3) RAM monitor area setting dialog box
Set RRAM Area
Start:
Size:
Area:
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 65 of 88
blocks
Cancel
3. Usage (Emulator Debugger)
Modifying the RAM monitor display area
Clicking this button opens the RAM monitor setting window.
: Shows the RAM monitor area setting window.
To change the displayed area, click the following buttons.
:
Shows the blocks at the preceding addresses.
: Shows the blocks at the following addresses.
RAM Monitor area setting window
By default, the monitor area is set to 000400h through 0007FFh.
It is possible to add, delete and change the RAM monitor area.
You can change the start address, size (number of blocks) of the
RAM monitor area by selecting the desired RAM monitor area
from the list.
To add a RAM monitor area, click the "Add..." button. The RAM
Monitor Area Setting Window will be displayed.
Specifying the start address
You can set the start address of the RAM area to be monitored.
Specifying the size
You can set the size to be monitored by specifying the number of
blocks from the start address. One block is 256 bytes in size.