Renesas R0E521000EPB00 User Manual page 57

R0E521000EPB00 User's Manual
(3) When DATA ACCESS is selected
1) Setting the addresses
2) Setting data
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 57 of 88
3. Usage (Emulator Debugger)
Setting the address
Specified in the Address tab. You can set eight conditions, e.g., a
specified address, a specified address range, etc.
After the address setting completion, set the data.
Setting data
Specified in the Data tab.
You can set eight conditions, e.g., specified data. specified data
range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and read/write.
When you have finished setting the data and access condition,
click OK.