Power Supply For The Emulator - Renesas R0E521000EPB00 User Manual

R0E521000EPB00 User's Manual

2.5 Power Supply for the Emulator

The power is supplied from AC adapter to the PC7501. Here following explains how to connect the AC adapter.
(1) Turn OFF the power to the PC7501.
(2) Connect the DC cable of AC adapter to the PC7501.
(3) Connect the AC power cable to the AC adapter.
(4) Connect the AC power cable to the receptacle.
Cautions for AC Adapter:
Use only the AC adapter included in PC7501 package.
The included AC adapter is for PC7501. Do not use it for other product.
Before installing this equipment or connecting it to other equipment, disconnect the AC power cable from its
outlet to prevent injury or accident.
The DC plug on the included AC adapter has the below polarity.
The included AC adapter has no power supply switch. The AC adapter is always active while connecting the
AC power cable. Check if the power is supplied by the LED of AC adapter.
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 24 of 88
CAUTION
2. Setup