Renesas R0E521000EPB00 User Manual page 56

R0E521000EPB00 User's Manual
3) Opening the break event setting dialog box
(2) When FETCH is selected
1) Setting the address
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 56 of 88
3. Usage (Emulator Debugger)
Specifying the event type
Click to select the event type you want to set.
- FETCH
Detects an instruction prefetch.
- DATA ACCESS
Detects a memory access.
- BIT SYMBOL
Detects a bit access.
- INTERRUPT
Detects an occurrence of interruption or interrupt completion.
- TRIGGER
Detects a signal from the external trace signal input cable.
Setting the address
You can set eight conditions, e.g., a specified address, a specified
address range, etc. When you have finished setting the address,
click OK.