Table of Contents
Advertisement
R0E521000EPB00 User's Manual
1.3.2 Names and Functions of the PC7501 Upper Panel LEDs
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
Figure 1.2 Names of the LEDs on the upper panel of the PC7501
(1) System Status LEDs
The system status LEDs indicate the emulator PC7501's power supply, firmware operating status, etc. Table 1.3 lists the
definition of each system status LED.
Table 1.3 Definitions of the system status LEDs
Name
Status
POWER
ON
OFF
SAFE
ON
Flashing
OFF
ERROR
ON
Flashing
OFF
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 16 of 88
System status
Target status
LEDs
Emulator system power supply is turned ON.
Emulator system power supply is turned OFF.
Emulator system is operating normally.
1. The self-check is being executed.
2. Downloaded firmware is being written into memory.
3. If the ERROR LED is flashing on at the same time or alternately, it
indicates that the self-check error occurred.
PC7501 system is not operating normally (system status error).
PC7501 system is not operating normally (system status error).
1. Firmware is being downloaded.
2. If the SAFE LED is flashing at the same time or alternately, it indicates
that the self-check error occurred.
Emulator system is operating normally.
LEDs
Meaning
1. Outline
Advertisement
Table of Contents
