Connecting To A 32-Pin 0.8Mm Pitch Lqfp Foot Pattern - Renesas R0E521000EPB00 User Manual

R0E521000EPB00 User's Manual

2.9.1 Connecting to a 32-pin 0.8mm pitch LQFP foot pattern

Figure 2.8 shows how to connect the emulation probe to a 32-pin 0.8mm pitch LQFP foot pattern on the user system with the
R0E521134CFG00 (included with the R0E521134EPB00), R0E521276CFG00 (included with the R0E521276EPB00) or
R0E5212L4CFG00 (included with the R0E5212L4EPB00) and here following is the procedure.
For details on the R0E521134CFG00, R0E521276CFG00 and R0E5212L4CFG00, refer to each user's manual.
(1) Mount the NQPACK032SA included with the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the user
system.
(2) Attach the YQPACK032SA included with the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the
NQPACK032SA, and fix them with the YQ-GUIDE's.
(3) Attach the J3 and J4 of the R0E521000EPB00 to the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00.
(4) Attach the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the YQPACK032SA
●: No.1 pin
*: These items are included with the R0E521134CFG00, R0E521276CFG00 and R0E5212L4CFG00 packages.
Figure 2.8 Connecting to a 32-pin 0.8mm pitch foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter board:
The connectors
R0E5212L4CFG00 are guaranteed for only 50 insertion/removal iterations.
Between the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 and the YQPACK032SA are
guaranteed for only 100 insertion/removal iterations
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 30 of 88
R0E521000EPB00
(3)
YQ-GUIDE (×4) *
YQPACK032SA *
NQPACK032SA *
CAUTION
IMPORTANT
of the R0E521000EPB00
R0E521134CFG00
R0E521276CFG00
R0E5212L4CFG00
On-board evaluation
(4)
HQPACK032SA
(not included)
FLASH
version MCU
(2)
(1)
32-pin 0.8mm pitch LQFP
(PLQP0032GB-A) foot pattern
and the R0E521134CFG00,
2. Setup
R0E521276CFG00 or