Hardware Specifications; Target Mcu Specifications - Renesas R0E521000EPB00 User Manual

R0E521000EPB00 User's Manual

4. Hardware Specifications

This chapter describes specifications of this product.

4.1 Target MCU Specifications

Table 4.1 lists the specifications of target MCUs which can be debugged with this product.
Table 4.1 Specifications of target MCUs for the R0E521000EPB00
Item
Applicable MCU
Applicable MCU mode
Maxi. ROM/RAM capacity
Operating voltage/frequency
*1 If the system is used with power supply voltages less than 2.7V, change the JP1 setting of the R0E521000EPBM0 to the
EXT side. For details, see "2.10.2 Setting the POWER Selection Jumper" (page 39).
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 66 of 88
R8C/Tiny Series
Single-chip mode
1. Internal flash ROM: 112KB (programming area) +4KB (data area)
Program: 04000h--1FFFFh,
Data: 02000h--02FFFh
2. Internal RAM: 8KB
00300h--012FFh, 03000h--03FFFh
20MHz at 3.0--5.5V
10MHz at 2.7--5.5V
*1
5MHz at 2.2--5.5V
Description
4. Hardware Specifications