Connecting To A 42-Pin 0.8-Mm-Pitch Foot Pattern - Renesas M30290T-EPB User Manual

M30290T-EPB User's Manual

3.4.1 Connecting to a 42-pin 0.8-mm-pitch Foot Pattern

Here following is a procedure of connecting to a 42-pin 0.8-mm-pitch foot pattern on the user system using the
M30263T-42SSB (included with the M30263T-EPB-FP). For details on the M30263T-42SSB, refer to its user's
manual.
(1) Mount the socket main unit included with the M30263T-42SSB to the user system.
(2) Attach the M3T-SSOP42B-450 included with the M30263T-42SSB and the socket frame to the socket main unit.
(3) Attach the J1 and J2 of the M30290T-PTCB to the J3 and J4 of the M30290T-EPB.
(4) Attach the M30263T-42SSB to the M3T-SSOP42B-450.
Figure 3.10 Connecting to a 42-pin 0.8-mm-pitch foot pattern
Notes on Connecting the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the
emulator and targets system.
The connectors of the M30290T-EPB and M30290T-PTCB are guaranteed for only 50 insertion/removal
iterations.
(1) Debugging
M30290T-PTCB
Socket frame *
M3T-SSOP42B-450 *
Socket main unit *
●: No. 1 pin
*: These products are included with the M30263T-42SSB package.
M3T-FLX160-EPB
M30290T-EPB
M30263T-42SSB
(2) On-board evaluation
Socket frame *
42-pin 0.8-mm-pitch
(42P2R-E) foot pattern
CAUTION
( 32 / 58 )
MCU with on-chip
flash memory etc.