Table of Contents
Advertisement
R0E521000EPB00 User's Manual
2.4 Connecting to the PC7501
Figure 2.3 shows how to connect the emulation probe to the PC7501.
Figure 2.3 Connecting the emulation probe to the PC7501
Caution for Connecting to the PC7501:
Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be damaged.
Notes on Connecting to the PC7501:
When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally and
insert it directly.
The connectors of the R0E521000EPB00 are guaranteed for only 50 insertion/removal iterations.
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 23 of 88
Note: Connect the PCA7501EPBA board side to the M3T-FLX160-EPB.
CAUTION
IMPORTANT
M3T-FLX160-EPB
R0E521000EPB00
2. Setup
Advertisement
Table of Contents
