Table of Contents
Advertisement
R0E521000EPB00 User's Manual
5.2.3 Errors Occur at Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error
Target MCU is uncontrollable.
5.3 How to Request a Support
After checking the items in "5 Troubleshooting", fill in the text file which is downloaded from the following URL, then send
the information to your local distributor.
http://tool-support.renesas.com/eng/toolnews/registration/support.txt
For prompt response, please specify the following information:
(1) Operating environment
- Operating voltage:
- Operating frequency:
- Clock supply to the MCU:
(2) Condition
- The emulator debugger starts up/does not start up
- The error is detected/not detected in the self-check
- Frequency of errors: always/frequency (
(3) Problem
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 83 of 88
Connection to
the user system
Connected
(1) Check that the NQPACK etc. mounted on the user system is
soldered properly.
(2) Check that the connector is installed properly to the user system.
[V]
[MHz]
Internal oscillator/External oscillator
5. Troubleshooting
Checkpoint
)
Advertisement
Table of Contents
