Connecting To A 32-Pin 0.8Mm Pitch Lqfp Foot Pattern - Renesas R0E521000CPE00 User Manual

R0E521000CPE00 User's Manual

2.9.1 Connecting to a 32-pin 0.8mm pitch LQFP Foot Pattern

Figure 2.20 shows a procedure of connecting to a 32-pin 0.8mm pitch LQFP foot pattern on the user system using the
R0E521134CFG00 (included with the R0E521134CPE00), R0E521276CFG00 (included with the R0E521276CPE00) or
R0E5212L4CFG00 (included with the R0E5212L4CPE00). For details on the R0E521134CFG00, R0E521276CFG00 and
R0E5212L4CFG00, refer to each user's manual.
(1) Mount the NQPACK032SA included with the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the user
system.
(2) Attach the YQPACK032SA included with the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the
NQPACK032SA and secure it with the YQ-GUIDE's.
(3) Attach the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 to the YQPACK032SA.
R0E521134CFG00
R0E521276CFG00
R0E5212L4CFG00
: No. 1 pin
*: These items are included with the R 0E521134CFG00, R0E521276CFG00 and R0E5212L4CFG00 packages.
Figure 2.20 Connecting to a 32-pin 0.8mm pitch LQFP foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter Board:
The connectors of the R0E521000CPE00 and R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00
are guaranteed for only 50 insertion/removal iterations.
The connectors of the R0E521134CFG00, R0E521276CFG00 or R0E5212L4CFG00 and YQPACK032SA are
guaranteed for only 100 insertion/removal iterations.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 38 of 92
R0E521000CPE00
(3)
YQ-GUIDE (x4) *
YQPACK032SA *
NQPACK032SA *
CAUTION
IMPORTANT
On-board evaluation
(4)
HQPACK032SA
(not included)
FLASH
version MCU
(2)
(1)
32-pin 0.8mm pitch LQFP
(PLQP0032GB-A) foot pattern
2. Setup