Table of Contents
Advertisement
6
NETWORK FUNCTION
The function explained in this chapter is available for the following servo amplifier.
MR-JET-_G
This is a function that uses an Ethernet communication to access servo amplifiers remotely. The network function of the servo
amplifier is as follows.
Function
FTP server function
Precautions
• To ensure the safety of the system against unauthorized network access, take security measures such as using a firewall.
Communication speed
The factory setting for communication speed may switch depending on the parameter setting value and firmware version.
Change the setting as necessary. Details on the communication speed are as follows.
■Communication speed combinations
[Pr. PN13.0-3 Network protocol setting]
0000h (CC-Link IE TSN) (initial value)
0000h (CC-Link IE TSN) (initial value)
0004h (CC-Link IE Field Network Basic)
0004h (CC-Link IE Field Network Basic)
*1 Available on servo amplifiers with firmware version C0 or later.
Description
This function enables file transfer with the servo amplifier.
[Pr. NPA12 Communication speed]
2 (initial value)
1
*1
2 (initial value)
*1
1
Communication speed
1 Gbps
100 Mbps
100 Mbps
100 Mbps
6 NETWORK FUNCTION
6
215
Advertisement
Table of Contents
