6.9
Heating cable
This section applies to drives that are delivered in multiple transport units
and are equipped with a heating cable.
Procedure
1. Connect the power supply of the heating cable.
Note: For more information on power supply connections, see the
converter hardware diagram in "Appendix D – Wiring diagrams".
2. Connect the heating cables of two adjoining transport units with
each other.
3. Fasten the connectors with cable ties.
(1) Heating cable plug
3BHS212794 E01 REV M
1
1
2
2
Figure 6-44 Heating cable connection
ACS6000 USER MANUAL
06 ELECTRICAL INSTALLATION
(2) Cable tie
166/278