6.8.7.4
Routing cables in an EXU cabinet with an ED7Y type DCS800 converter
1. Unscrew the rectangular cover from the DCS800 unit.
(1) Control panel
2. Connect the two optical fibers to the receptacles of channel CH0 (B)
on the COM-8x circuit board (A) according to the terminal numbers
printed on the marker sleeves.
Figure 6-41 COM-8x circuit board (A) in a DCS800 converter (ED7Y type) and a
3BHS212794 E01 REV M
Figure 6-40 DCS800 converter (ED7Y)
A
detail of channel CH0 (B) on the board
ACS6000 USER MANUAL
06 ELECTRICAL INSTALLATION
1
2
(2) Removable cover
B
CH0
162/278