Removing And Installing A Phase Module; Removing A Phase Module - ABB ACS6000 User Manual

10.4.10 Removing and installing a phase module

Several maintenance actions require the removal of phase module from an
ARU/INU, eg, to access the back of the cabinet or to work on the
phase module.

10.4.10.1 Removing a phase module

1. Disconnect the water hoses.
Note: To disconnect the water hose, pull the locking sleeve of the
coupling towards the front of the cabinet (arrow).
2. Cut off the cable ties (1) and disconnect the optical fibers and the
power supply leads (2).
3BHS212794 E01 REV M
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
1
1 2
ACS6000 USER MANUAL 253/278