Air-To-Water Heat Connections; Lift Heat Exchanger Out Of Exu Cabinet - ABB ACS6000 User Manual

5. Disconnect the water tubes (1) from the air-to-water heat exchanger,
unplug the cables (2) and remove the fastening screws.
(1) Water tube connections
(1) Fastening screw
6. Lift the heat exchanger out of the cabinet.
CAUTIONThe heat exchanger weighs approximately 16 kg and requires
a minimum overhead clearance of 85 cm.
3BHS212794 E01 REV M
Figure 10-30 Air-to-water heat connections
Figure 10-31 Lift heat exchanger out of EXU cabinet
ACS6000 USER MANUAL
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
1
1
3
3
(2) Cable connections
2
275/278