Wire Connection Points On The Circuit Board - ABB ACS6000 User Manual

3. Take note of the orientation of the circuit board and where the plug-
in connectors and wires are connected to.
4. Unplug the plug-in connectors and wires from the circuit board.
5. Remove the circuit board.
6. Place the circuit board on the spacers and gently push the circuit
board onto the spacers until they snap in properly.
7. Reconnect the wires to the circuit board (Fig. 10-27).
No. Description
1 Ground wire
2 Supply phase
3 Supply neutral
4 4x external capacitors
5 4x fan power supply
6 4x fan alarm signals
7 ON
8 LEDs
9 Alarm 1
3BHS212794 E01 REV M
1
9
Figure 10-27 Wire connection points on the circuit board
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
2 3
Pin Pin
J15
L
N
1x J3 2x J5
1x J4 2x J6
1x J22 2x J23
J11
Red J18 Green J19
J1
ACS6000 USER MANUAL
4
5
6
7
8
Pin Pin
3x J7 4x J9
3x J8 4x J10
3x J24 4x J25
264/278