Displaying A Fault And Resetting The Fault Memory - ABB ACS6000 User Manual

6. To confirm the selection and to return to the actual signals display,
press the ENTER key.
7. To cancel the selection and keep the original selection, press any of
the mode selection keys. The selected keypad mode is entered.
9.2.2.6

Displaying a fault and resetting the fault memory

1. To open the actual signals display, press the ACT key.
2. To change to the fault memory display, press a fast navigation key.
3BHS212794 E01 REV M
ACT PAR FUNC DRIVE
I 0
ACT PAR FUNC DRIVE
I 0
ACT PAR FUNC DRIVE
I 0
ACS6000 USER MANUAL
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
NP VOLT 0 V
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
1 L -> 600.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
09 CDP CONTROL PANEL
206/278