Overview; Operating Conditions - ABB ACS6000 User Manual

8. Operation
8.1

Overview

This chapter outlines the local operation of the drive.
Note: Control of the drive via a PLC or higher-level control system is not
described in this chapter. If the drive is controlled from a remote location,
see the applicable manuals for information.
The status messages and parameter settings used in this chapter are
typical examples to illustrate the related instructions and display
functions and may therefore differ from the actual status messages and
parameter settings in the drive.
8.2

Operating conditions

The operating conditions for the drive are according to IEC 60721-3-3.
• Classification: 3K22 / 3B1 / 3S6 / 3M11
8.3 Safety
The drive system must only be operated by qualified and authorized
personnel, ie, personnel who are familiar with the operation of the drive
system and the hazards involved.
3BHS212794 E01 REV M ACS6000 USER MANUAL 173/278