Installing And Removing Air-To-Air Heat Exchangers; Installing Air-To-Air Heat Exchangers; Air-To-Air Heat Exchanger (Type Lt-5-5165-Ul); Tools For Installing An Air-To-Air Heat Exchanger - ABB ACS6000 User Manual

5.8

Installing and removing air-to-air heat exchangers

This section describes how to install and remove the optional air-to-air
heat exchangers.
5.8.1

Installing air-to-air heat exchangers

For information on the number of air-to-air heat exchangers to be
installed and their fitting position, see "Appendix C –
Mechanical drawings".
• Weight: ~65 kg
• Length: 1025 mm
• Width: 750 mm
• Height: 316 mm
3
(1) Cordless drill
(2) Wire cutter
(3) Torx drill bit
3BHS212794 E01 REV M
Figure 5-9 Air-to-air heat exchanger (type LT-5-5165-UL)
1
4
Figure 5-10 Tools for installing an air-to-air heat exchanger
(4) M6 x 12 Torx screw
(5) Cable tie
ACS6000 USER MANUAL
05 MECHANICAL INSTALLATION
2
5
112/278