Minimum Distance Between Bolted Joints Of Different Phases; Bolted Busbar Connections – Marine Drives - ABB ACS6000 User Manual

3. Choose the length and the orientation of the bolts so that the
distance between bolted joints of different phases is not less
than 25 mm.
Figure 6-22 Minimum distance between bolted joints of different phases
(1) 25 mm
6.7.5.3 Bolted busbar connections – marine drives
The following bolts, washers and nuts are supplied and fixed to the
busbars in marine drives.
Part
Hex-head bolt
Coated hex-head nut
Conical spring washer
3BHS212794 E01 REV M
1
2
Figure 6-23 Bolted busbar connection - marine drives
Quantity
M12x40-A2
M12-A2-70
13 x 29 x 3
ACS6000 USER MANUAL
1
in an EXU
Identification
NB 312350P8119
HZN 452198P1022
HAQN400344P0111
06 ELECTRICAL INSTALLATION
3
1
147/278