Xerox B205 Service Manual page 95

12. Remove the Drive Gears and Bushings,
Note the order of the Feed and Registration Drive Gears as removed for correct installa-
tion.
a. Remove the snap ring, the remove the Feed and Registration Drive Gears.
b. Remove two snap rings, then remove the Feed and Registration Clutch Bushings.
c. Release two latches, then remove the Shaft Bushings.
Feed & Registration Drive Gears
Clutch Bushings
Figure 5 Drive Gears and Bushings
Repairs / Adjustments
REP 4.9
Figure 5:
CAUTION
Snap Ring
Shaft Bushings
13. Remove the Feed and Registration Sensor PWB Cover,
a. Remove the screw.
b. Release the latch, then remove the cover.
Screw
Figure 6 Feed and Reg Sensors PWB Cover (Bottom View)
July 2019
4-28
Figure 6:
Latch
Xerox® B205/B215 Multifunction Printer Service Manual
Initial Release