3.
Open the Rear Cover, then release the support arm on each side of the cover,
Support Arms
Figure 2 Support Arms
4.
Push down on the top of the Rear Cover to release the latch hooks, then remove the Rear
Cover.
Replacement
The replacement is the reverse of the removal procedure.
Important: When installing a new Rear Cover, remove the Data Plate Label from the old Rear
Cover and install it onto the new Rear Cover,
Repairs / Adjustments
REP 2.3, REP 2.4
Figure
Figure
1.
2.
REP 2.4 Manual Feed Cover
Parts List on
PL 2.1
Removal
1.
Release two pivots, then remove the Manual Feed Cover,
Pivots
Figure 1 Manual Feed Cover (Top View)
Replacement
1.
The replacement is the reverse of the removal procedure.
NOTE: Remove the Tag Matrix from the old cover and install it on to the new Manual
Feed Cover,
Figure
1.
July 2019
4-14
Figure
1.
Tag Matrix
Xerox® B205/B215 Multifunction Printer Service Manual
Initial Release