Xerox B205 Service Manual page 97

16. Remove the PWBs, Figure 9:
a. Disconnect the connectors, the ground wire, and the FFC cable on the HVPS PWB.
b. Remove six screws attaching the HVPS PWB.
c. Remove the four spring contacts from the high voltage contact guide.
d. Disconnect the connectors, remove six screws attaching the LVPS PWB, Remove
the LVPS PWB, then remove the insulation pad behind the LVPS PWB.
e. Remove six screws attaching the LVPS PWB, then remove the insulation pad behind
the LVPS PWB.
f. Disconnect the connectors, remove five screws attaching the Main PWB, then
remove the Main PWB.
Main PWB
HVPS PWB
LVPS PWB
Figure 9 PWB Removal
Repairs / Adjustments
REP 4.9
17. Remove two screws on the left-side,
then remove the LSU Assembly.
Figure 10 LSU Left Side Screws
Figure 11 LSU Right Side Screws
July 2019
4-30
Figure 10, two screws on the right-side,
Screws
Screws
Xerox® B205/B215 Multifunction Printer Service Manual
Figure 11,
Initial Release