Xerox B205 Service Manual page 112

7. Remove two screws, pull the right side of the assembly out of the printer, then slide the
assembly out to the right removing Feed and Forward Roll Assembly,
Figure 2 Removing the Feed and Forward Roll Assembly (Bottom View)
8. Remove the Feed and Forward Rolls from the assembly,
Figure 3 Feed and Forward Roll Assembly
Initial Release
Xerox® B205/B215 Multifunction Printer Service Manual
Figure
Screws
Figure 3.
Replacement
2.
NOTE: Tapered plastic screws and round machine screws are used to hold the cover to the
frame. Make sure that the plastic screws go into plastic components and machine screws go
into the metal frame.
The replacement is the reverse of the removal procedure.
NOTE: When replacing the Feed and Forward Roll Assembly made sure the flat on the bush-
ing is lined up with the flat on the assembly,
July 2019
4-45
Figure 4.
Bushing Flat
Figure 4 Bushing Flat (Bottom View)
Repairs / Adjustments
REP 4.14