Xerox B205 Service Manual page 175

Exit Diagnostic Mode:
1. Press the <Back/Exit> button on the top right of the screen, the Exit screen appears,
ure 5.
Figure 5 Back to Exit screen
2. Select <Yes> to exit diagnostics and reboot the machine or <No> to exit Diagnostics only,
Figure 6.
Figure 6 Exit Diagnostics
General Procedures / Information
GP 1
Procedure - B205 Diagnostics Mode (Tech Mode) Entry
Fig-
Diagnostics entry for the B205:
1. On the B205 at the <Ready> screen, press in quick succession the keys: Menu, Back,
Up, Down, OK, Stop, Menu to enter Diagnostics Mode.
2. At the [Tech Mode] screen, select [OK].
3. Press the <Up> or <Down> keys to the scroll through the Diagnostics menu.
4. Press the <Ok> key, the following options are available:
• Data Setup
• Machine Test
• Report
• Exit Diagnostics
Exit Diagnostic Mode:
1. With [Tech Mode] on the top line of the display, press <Down> until [Exit Diag.] appears.
Select [OK].
2. At [Exit Diag.?] screen, select [OK].
3. At [Reboot Now?] screen, using <Up> or <Down> to choose whether to reboot the
device; select [OK].
Refer to Section 6, Diagnostic Information
Mode.
NOTE: Be Advised:
• After 30 seconds of inactivity, the selected diagnostics menu will time out and revert back
to the level to select Tech Mode or User Mode again.
• After 2 minutes of inactivity, the device will completely exit out of diagnostics
July 2019
6-16
for a listing of available functions within Diagnostics
Xerox® B205/B215 Multifunction Printer Service Manual
Initial Release