6.
Remove three screws, disconnect two connectors and the ground wire, then remove the
Control Panel,
Figure
5.
Figure 5 Operator panel removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs / Adjustments
REP 8.3, REP 8.4
REP 8.4 Control Panel PWB (B215)
Parts List on
PL 8.2
Removal
1.
Switch off the printer, then disconnect the power cord.
2.
Remove the Control Panel,
3.
Remove three screws attaching the Lower Cover, then remove the Lower Cover,
Figure 1 Cover-Stopper removal
July 2019
4-66
REP
8.3.
Xerox® B205/B215 Multifunction Printer Service Manual
Figure
1.
Initial Release