Switching Mainframe A Settings (7001) - Keithley 7001 Instruction Manual

4.12.2 Switching mainframe A settings (7001)

Scan List = 1!1-1!10, 2!1-2!10, M1,
M1 is a "dummy" channel configured to open all channels. This lets the last
channel in a mainframe open before closing the first channel in the other
mainframe.
Card Delay = 0.0
Pole Mode = 2-Pole
Scan Configuration:
Arm Control:
Scan Control:
Channel Control: Spacing
*RESET default setting
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
NOTE
Spacing
Input Trigger
Output Trigger
Count
Control
Spacing
Input Trigger
Output Trigger
Count
Control
Trigger Link Mode
Input Trigger
Output Trigger
Count
Control
TrigLink
Line 5
Line 6
1*
Source
TrigLink
Line 3
Line 4
2
Source
TrigLink
Asynchronous*
Line 1*
Line 2*
ScanList*
Source*
Front Panel Operation
4-65