Ntransition <Nrf - Keithley 7001 Instruction Manual

10 OUTPUT 707; ":stat:oper:ptr 1026; ptr?"
Programming
20 ENTER 707; A$
example
30 PRINT A$
40 END
Line 10 Sets Bits B1 and B10 of the PTR Operation Transition Filter, and then queries the reg-
Line 20 Addresses the 7001 to talk.
Line 30 Displays the decimal value that defines which bits in the register are set (1026).
:NTRansition <NRf>
5.16.3
:STATus:OPERation:NTRansition <NRf>
:STATus:OPERation:TRIGger:NTRansition <NRf>
:STATus:OPERation:ARM:NTRansition <NRf>
:STATus:OPERation:ARM:SEQuence:NTRansition <NRf> Program Sequence Transition Filter (NTR).
Parameters
< NRf> = 0
Short-form
:stat:oper:ntr <NRf>
formats
:stat:oper:trig:ntr <NRf>
:stat:oper:arm:ntr <NRf>
:stat:oper:arm:seq:ntr <NRf>
Power-up
Defaults
*CLS
:STATus:PRESet
Query
:NTRansition?
commands
Short-form formats:
Response message:
Note: The binary equivalent of this decimal value indicates which bits in the register are set. For
example, for an acquired decimal value of 96, the binary equivalent is 0000 0000 0110 0000.
For this binary value, bits B6 and B5 are set.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
:STATus Subsystem
ister.
Clear NTR register
= 2 Set bit B1 of NTR register
= 4 Set bit B2 of NTR register
= 32 Set bit B5 of NTR register
= 64 Set bit B6 of NTR register
= 1024 Set bit B10 of NTR register
Clears (0) all bits
No effect
Clears (0) all bits
Query NTR register
:stat:oper:ntr?
:stat:oper:trig:ntr?
:stat:oper:arm:ntr?
:stat:oper:arm:seq:ntr?
Decimal value (see Note)
IEEE-488 Reference
Program Operation Transition Filter (NTR).
Program Trigger Transition Filter (NTR).
Program Arm Transition Filter (NTR).
5-109