Table of Contents
Advertisement
Front Panel Operation
4.6.1
SAVESETUP
The SAVESETUP menu is used for the following oper-
ations:
•
Save the current setup conditions in memory for
future recall. Up to 10 setups can be saved in mem-
ory.
•
Restore the instrument to setup conditions stored
in memory.
•
Setup the power-on (PWRON) configuration. The
instrument can be set to power-on to the factory
default setup conditions, or power-on to the setup
conditions stored at a specified memory location.
•
Reset the instrument to the original power-on set-
up conditions (see Table 4-3).
Perform the following steps to display the SAVESET-
UP menu:
1. Display the MAIN MENU (see paragraph 4.6, Gen-
eral rule #1).
2. Use the cursor keys (
on SAVESETUP, and press ENTER to access the
following menu:
SETUP MENU
SAVE RESTORE PWRON RESET
SAVE Use this menu item to save the current setup
conditions in memory at a specified memory location.
To select SAVE, place the cursor on SAVE and press
ENTER. The following typical message will be dis-
played:
SAVE SETUP #0 (0-9)
1. To save the current setup at the displayed memory
location, press ENTER. The instrument will return
to the SETUP MENU.
2. To save the current setup to a different memory lo-
cation, key in a value (0 to 9) and press ENTER. The
instrument will return to the SETUP MENU.
RESTORE Use this menu item to return the instru-
ment to the setup conditions that are stored in memory
at a specified memory location. To select RESTORE,
place the cursor on RESTORE and press ENTER. The
following typical message will be displayed:
RESTORE SETUP #0
4-24
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
and
) to place the cursor
1. To restore the instrument to the setup conditions
stored at the displayed memory location, press
ENTER. The instrument will return to the SETUP
MENU.
2. To restore the instrument to the setup conditions
stored at a different memory location, key in the
memory location (0 to 9) and press ENTER. The in-
strument will return to the SETUP MENU.
PWRON Use this menu item to select the setup condi-
tions that the instrument will power-on to. To select the
PWRON menu item, place the cursor on PWRON and
press ENTER. The following menu will be displayed:
SET POWER-ON DEFAULT
FACTORY-DEFAULT USER-SETUP
FACTORY DEFAULT With this selection, the instru-
ment will return to the factory default conditions (see
Table 4-3) the next time it is turned on. To select the
FACTORY-DEFAULT menu item, place the cursor on
FACTORY-DEFAULT and press ENTER. The instru-
ment will return to the SETUP MENU.
USER SETUP Using this selection, the instrument will
power-on to the setup conditions saved at a specified
memory location. To select USER-SETUP, place the cur-
sor on USER-SETUP and press ENTER. The following
typical message will then be displayed:
PWRON DEFAULT = #0
1. To power-on to the setup conditions stored at the
displayed memory location, press ENTER. The in-
strument will return to the SETUP MENU.
2. To power-on to setup conditions stored at a differ-
ent memory location, key in the memory location
(0 to 9) and press ENTER. The instrument will re-
turn to the SETUP MENU.
RESET Use this menu item to reset the instrument to
the RESET default setup conditions (see Table 4-3). To
select RESET, place the cursor on RESET and press EN-
TER. The following message will be displayed:
RESETTING INSTRUMENT
Press ENTER to display:
RESET COMPLETE
Press ENTER to return to the SETUP MENU.
Advertisement
Table of Contents
