Page 1
Installation and Setup Guide 020-001660-02 Secure Series LCD Panels SUHD551-L, SUHD651-L, SUHD751-P, SUHD861-P...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Using the Crestron RoomView Control tool........18 Secure Series LCD Panels Installation and Setup Guide–SUHD551-L, SUHD651-L, SUHD751-P, SUHD861-P 020-001660-02 Rev.
Page 4
Remote control does not work......... . .29 Secure Series display panels Specifications......30 Physical specifications.
Image retention is not covered under warranty. To prolong the life of your display panel, follow these recommendations. • Operate the display panel within its rated ambient environment. Christie recommends an operating temperature of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit), with a maximum relative humidity of 90%.
Installing the IR extender cable (on page 13) Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
To add touch functionality to the SUHD551-L, SUHD651-L, and SUHD751-P panels, install the appropriate TA551, TA651, or TA751 touch overlay kit. To maximize the touch functionality on the LCD display panel, Christie recommends installing interactive software such as Quizdom OKTOPUS or Microsoft Whiteboard on the connected computer.
To provide a network distributed processor for managing content on the display panel, install an OPS module. The Secure Series display panels only support OPS modules with a power draw of 40 watts or less. 1. Ensure the display panel is powered off.
When mounting the SUHD751-P and SUHD861-P in portrait mode, ensure the ports and OPS slot are on the bottom edge of the display panel. It may be necessary to move the Christie name plate to the bottom edge of the display panel. Use a #1 Phillips screwdriver to remove the screws from the nameplate, and to remove the extra screws from the secondary nameplate location on the bottom of the panel.
Playing media over the network Play content available on the same network as the display panel. For higher playback quality, Christie recommends using a wired connection when connecting the display panel to other devices. Third party software such as Nero MediaHome may be required to share content over the network.
Page 33
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa United Kingdom Columbia Korea (Seoul) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: +57 (318) 447 3179 ph: +82 2 702 1601 Christie Digital Systems Canada Inc.