Status Tab - Thermo Scientific LevelPRO User Manual

Operation
Detector Screens

Status Tab

-
4 38 LevelPRO User Manual
The Status Tab displays detector status and information.
To access the information on the Detector Status tab using only the remote transmitter
keypad, see Figure A-7.
Figure 4-21. Detector Status Tab
All of the fields on this screen, which are listed below, are for display purposes only and
are not configurable by the user.
– Filtered Data Count
– CAL/STD Count/sec
– IBP Firmware Version
– IBP Compile Date/Time
– Analog Input (Raw)
– Power Supply Type
– DAC Output 0 Volt
– DAC Output 1 Volt
– Preamp Type
– CPLD Version
– Battery Voltage
– CPLD Status
– System Err Code #1
– System Err Code #2
– Software Err Code
Thermo Scientific