Advertisement
Operation
System Control
USB Port
System Control
-
4
4
LevelPRO User Manual
3. For Modbus using TCP/IP, enter the Modbus encapsulated port number and IP
port number in the indicated textboxes.
4. Select the Floating Format, either Normal or Reversed. This selection determines
the order in which bytes and words will be sent.
5. The MAC address should only be configured or changed by Thermo Scientific
technical support personnel.
Note: For help in establishing the correct information to input onto this
screen, please see your system administrator.
6. Once all information has been entered, click Submit to save the data, Refresh to
update the data throughout, or Cancel to exit Communication Setup without
saving.
The Main CPU PCA includes a USB port, which allows the user to connect to the
system using a type A Male to Mini 5-pin Male USB cable. Operators should ensure
the area is non-hazardous before connecting or disconnecting the USB cable.
The System Control screen allows the user to configure the date and time, scroll times
and contrast.
From the EZ Cal II menu tree, select System Control.
Figure 4-3. System Control Configuration
Thermo Scientific
Advertisement
