Advertisement
Password
Entry/Validation
Thermo Scientific
The following values shall be available for editing purpose when the detector is in
engineering mode.
–
Engineering Password
–
Technician Password
–
Operator Password
–
Engineering Mode Count
–
Technician Mode Count
–
Operator Mode Count
To access the information on the Password Entry screen using only the remote detector
keypad, see
Figure
A-19.
The Password Entry/Validation screen can be accessed either by selecting the screen
from the Functions dropdown menu at the top of the screen, or by clicking the right-
most icon button, which is circled in Figure 3-2.
Figure 3-2. Password Entry Screen
The LevelPRO detectors have been previously configured with passwords for Engineer,
Technician and Operator modes. Currently, Engineer and Display List are the only
functioning modes. Technician and Operator mode will be available in future software
releases.
–
To keep passwords hidden by having them display as asterisks onscreen at key-in,
enable the Display Password Mode field. Disabling this field will show the
information entered.
–
Enter the password into the User Password Entry textbox to enter Engineer mode.
Startup & the Setup Wizard
User Modes & Passwords
LevelPRO User Manual
3-5
Advertisement
