Advertisement
Operation
Application Screens
Alarm Functions
-
4
52
LevelPRO User Manual
Figure 4-33. High and Low Alarms
The function of the process alarms is to provide a critical signal to the detector based
on the user's configuration. There are a total of sixteen alarms available per detector.
Each alarm can be set to trigger on any one of the four measurements. The process
alarms report high-limit alarms and low-limit alarms based on the set and clear point
values and on the action delay time set by the user.
1. Choose an operational mode from the Setup dropdown.
Disable – The alarm is disabled; no alarm action is executed.
•
Thermo Scientific
Advertisement
