Application Screens; Setup Tabs; Level Setup - Thermo Scientific LevelPRO User Manual

Application
Screens

Setup Tabs

Level Setup

Thermo Scientific
While the Setup Wizard is the preferred setup method, the Level Setup tab also
provides the user with a way to configure the primary measurement. The Setup Wizard
can be accessed through the Functions dropdown menu or by clicking the blue
wizard's cap icon near the top right corner of the screen.
To access the information on the Application Level Setup tabs using only the remote
transmitter keypad, see Figure
Figure 4-24. Application Screens, Level Setup Tab
The primary measurement, Measurement #1, is dedicated to level measurement. The
value and units of this measurement are determined by the Level Unit and Minimum
and Maximum Span entered on the Level Setup screen. The primary measurement can
only be assigned to one input.
1. Indicate the type of source head in use by using the Source Head dropdown list.
This field allows the user to keep a record of the type of source head only and does
not affect the primary measurement.

5176 source head

5190 source head

5193 source head

5200 source head

5201 source head
A-1.
Operation

Application Screens

LevelPRO User Manual 4-41