Advertisement
Startup & the Setup Wizard
The Setup Wizard
Standardization
-
3
12
LevelPRO User Manual
16. Once the level setup is complete, the user may save the file to the computer, or
save the file to the computer and download it to the detector by clicking the
appropriate button.
17. Click the Next button to return to the Type Selection screen,
complete the device configuration.
18. The remaining detector setup parameters can be configured from the Wizard Type
Selection screen by selecting Standardization or Gauge Calibration.
Note: The Standardization and Gauge Calibration options only configure
these parameters. Configuring the parameters does not initiate any action.
1. Select Standardization and click the Next button to advance to the following
screen.
Figure 3-11. Standardization Condition, Sample Time & Level
Figure
3-9, and
Thermo Scientific
Advertisement
