Thermo Scientific LevelPRO User Manual page 124

Flash Application Firmware
Program the Main
CPU
B-2 LevelPRO User Manual
1. Use a three-wire cable to connect PC-to- J2A of the Main CPU PCA. The cable
connections are shown in the
2. Open EZ Cal II and set the communications parameters as shown below.

Name:

Unit ID: 1

Port: Select the associated Com port

Baud rate: 57600

Parity: None

Data Bits: 8

Stop Bits: 1

Time Out (sec): 8
3. Click the green Connect button.
4. A Communication Fail pop-up window will be displayed. Click the OK button.
Figure B-2. Communication Fail Window
Table 2-1.
Thermo Scientific