Action; Measurement Data - Thermo Scientific LevelPRO User Manual

Action

Measurement Data

Thermo Scientific
Additionally, this tab allows the user to view displayed point data, to change the point
data by manually entering new values, and to submit or delete point data.
The Application Action tab provides the user the ability to hold the measurements
configured on the Additional Measurement Setup tab at the desired value. The
following options apply to Measurements #1 – #4.
To access the information on the Application Action tabs using only the remote
transmitter keypad, see Figure
Figure 4-30. Application Screen, Action Tab
1. Choose an operational mode from the Hold/Live dropdown.
Live
•
Hold
•
If Hold is selected, the Hold Value textbox becomes available to the user.

Enter a hold value for the measurement, using the same units used in the
measurement's configuration.
2. The following fields utilize values from other processes. These fields are not
configurable by the user on this screen.
Allocation – Displays the type of measurement.
•
Current Value – Displays the current measurement value.
•
Unit – Displays the units associated with the measurement's configuration.
•
The Measurement Data tab displays the live measurement values and configured
measurement units for Measurements #1 – #4 to allow for further analysis. These fields
are not configurable by the user.
To access the information on the Application Measurement Data tabs using only the
remote transmitter keypad, see
A-3.
Figure A-3.
Operation
Application Screens
4-49
LevelPRO User Manual