Rain Cover - Otto Bock Kimba Neo Instructions For Use Manual

Putting the rain canopy on
1) Bring the back support into the upright position.
2) Position the snap-in tongues on the rain canopy (see fig. 75, item 2) in parallel.
3) Push the snap-in tongues into the buckles (see fig. 75, item 1) until they click audibly into place (see fig. 75,
item 2).
Adjusting the angle of the rain canopy
1) Fold up the rain canopy.
2) Hold the rain canopy by the front support and push or pull the canopy to the desired angle. The hinge locks
into place automatically (see fig. 75, item 3).
Removing the rain canopy
1) Bring the back support into the upright position.
2) Press gently on the snap-in tongues on the rain canopy (see fig. 75, item 2) and and release them from the
buckle.
3) Pull the snap-in tongues out and remove the rain canopy.
74
Special features of the rain canopy
• The transparent rain canopy protects against rain from the side and allows permanent visual contact with the
child (see fig. 74).

7.2.10 Rain cover

NOTICE
Incorrect attachment
Damage to product due to incorrect installation
► During the attachment, make sure that the product cannot grind against the wheels.
The seating unit can be equipped with a rain cover that protects the user from getting wet (see fig. 76). The rain
cover can be stored in the canopy's side pocket (see fig. 77).
Using the rain cover
1) Take the rain cover out of the canopy's side pocket (see fig. 77).
2) Put the rain cover on over the canopy and the leg support. Make sure that the air intake is open and positioned
in front of the user's nose (see fig. 76, item 1).
Kimba Neo
75
Use
37