Rain Canopy - Otto Bock Kimba Neo Instructions For Use Manual

Use
NOTICE
Improper use of the canopy
Damage to the fabric due to user error
► Always remove the canopy before folding the rehab buggy so that it does not get folded up as well.
► Remove the canopy from the rehab buggy if it is stored for a long period to protect it from damage.
The seating unit can be equipped with a canopy to protect the user from sun or rain (see fig. 70).
Installing the canopy
1) Bring the back support into the upright position.
2) Position the snap-in tongues on the canopy (see fig. 71, item 2) in parallel.
3) Push the snap-in tongues into the buckles (see fig. 71, item 1) until they click audibly into place (see fig. 71,
item 2).
Adjusting the angle of the canopy
1) Fold up the canopy.
2) Hold the canopy by the front support and push or pull the canopy to the desired angle. The hinge locks into
place automatically (see fig. 71, item 3).
Removing the canopy
1) Bring the back support into the upright position.
2) Press gently on the snap-in tongues on the canopy (see fig. 71, item 2) and release them from the buckle.
3) Pull the snap-in tongues out and remove the canopy.
70
Special features of the canopy
• Opening the viewing window allows permanent visual contact with the child (see fig. 72).
• Removing the back section improves ventilation (e. g. in summer heat; see fig. 73).
• The rain cover can be stored in the canopy's side pocket (see fig. 77).
72

7.2.9 Rain canopy

The seating unit can be equipped with a rain canopy to protect the user from rain (see fig. 74).
36
71
73
Kimba Neo