Padding; Grab Rail - Otto Bock Kimba Neo Instructions For Use Manual

Hide thumbs Also See for Kimba Neo:

Table of Contents

Use

7.2.4 Padding

Information on taking off and putting on the padding and covers is provided in the section "Care": see Page 45.

CAUTION

Improper lifting by attendants

User tipping over or falling due to lifting by removable components

► The grab rail must not be used to lift the product.

INFORMATION

Note that only one of the following options may be used at one time as they all attach to the same adapter on the

seat:

- Grab rail

- Arm supports, standard

- Tray

For certain indications, the seating unit can be equipped with a grab rail that prevents the user from falling for

wards out of the seat.

The grab rail can be removed to make getting into the product easier.

Removing the grab rail

1) Press the releases (see fig. 64, item 1).

2) Pull the grab rail up and out (see fig. 64, item 2).

Attaching the grab rail

1) Insert the grab rail into the guides.

2) Press in the first tripod spring and push the grab rail down slightly. Then repeat this process on the opposite

side of the grab rail (see fig. 63).

3) Press the grab rail down until the springs engage behind the releases (see fig. 64, item 2).

Kimba Neo

Table of Contents