Rotating The Seating Unit; Adjusting The Seat Tilt - Otto Bock Kimba Neo Instructions For Use Manual

7
9

7.1.2 Rotating the seating unit

1) Detach the seating unit. For information on detaching the seating unit, see Page 12.
2) Turn the seating unit in the desired direction. For information on the possible directions of the seating unit, see
Page 10.
3) Adjust the tilt-limiter on the outdoor mobility base as appropriate to the direction in which the seating unit is
facing. For information on adjusting the tilt-limiter, see the instructions for use for the Kimba outdoor mobility
bases (reference number: 647H891).
4) Attach the seating unit. For information on attaching the seating unit, see Page 10.

7.1.3 Adjusting the seat tilt

CAUTION
Changed centre of gravity after operating the seat tilt
Tipping over, falling out of the user due to adjustment error
► Check the tip resistance each time after changing the seat tilt, especially in combination with a back support
angle setting. To do so, hold the product with both hands by the push handle/push bar.
CAUTION
Incorrect adjustment of the seat tilt
Tipping over, falling out of the seating shell/seating system due to user error
► First practice operating the seat tilt without the user.
► Operate the seat tilt only on a firm, level surface and with the wheel lock engaged.
► Before negotiating slopes or obstacles, always have the seat in the neutral, upright position. When driving
downhill, the seat should be tilted slightly backwards.
► Drive only on slopes where the holding forces remain manageable.
► When operating the seat tilt, always secure the user against falling out of the seating unit either forwards or
backwards. When operating the seat tilt, hold on tight to the push handle or push bar.
► Do not reach into the adjustment mechanism when operating the seat tilt.
Kimba Neo
8
Use
13