Canopy - Otto Bock Kimba Neo Instructions For Use Manual

The tray is mounted on the seating unit and secured against rotation.
The maximum allowable load on the tray is 3 kg.
Attaching the tray
1) Sit the user in the seating unit.
INFORMATION: If adjustable arm supports are being used, set them to their lowest position. For
information on adjusting the arm support height see Page 33.
2) Insert the tray into the adapters.
3) Press in the springs on the left and right sides of the tray (see fig. 68, item 1).
4) Press the tray down until the springs behind the releases engage.
Removing the tray
1) Remove all objects from the tray.
2) Press the release in (as with the grab rail, see Page 32).
3) Pull the tray out and up.
Adjusting the position of the tray
a) Adjusting the height
1) Loosen the Allen-head screws on the frame using a size 4 Allen key (see fig. 68, item 2).
2) Push the two sides of the frame upwards in parallel to the desired height.
3) Tighten the Allen-head screws.
b) Adjusting the depth
1) Release the clamping lever (see fig. 69, item 3) under the tray.
2) Slide the tray horizontally to the desired position (see fig. 69, item 1).
3) Tighten the clamping lever.
CAUTION! Do not pinch the user when sliding the product in. Ensure that the user's arms rest on the
tray and that the round cutout at the front does not press against the user's body.
c) Adjusting the angle
1) Release the clamping lever (see fig. 69, item 3) under the tray.
2) Rotate the tray to the desired angle (see fig. 69, item 2).
3) Tighten the clamping lever.
68

7.2.8 Canopy

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding out the backrest, only grip by the specified components.
Kimba Neo
69
Use
35