Legal Information; Liability; Warranty; Service Life - Otto Bock Kimba Neo Instructions For Use Manual

Legal information

All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
10 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.

10.1 Liability

The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.

10.2 Warranty

Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).

10.3 Service life

Expected lifetime: 4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life­
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.

11 Technical data

INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
Kimba Neo seating unit
Seat width [mm]
Seat depth [mm]
Back support height [mm]
Back support height (when using individually
adjustable head supports, the dimensions given for
the back support exclude the head supports) [mm]
Back support angle [°]
Height of shoulder harness slots (min./max.) [mm]
Width of shoulder harness slots [mm]
Lower leg lengths [mm]:
• Standard and angle-adjustable leg support
• Angle-adjustable leg support for short lower leg
lengths
5) 6)
Max. user weight [kg]
Max. user weight for use in vehicles for transporting
persons with reduced mobility [kg]
Weight [kg]
Folding size with hip supports (L x W x H) [mm]
1) From 140 mm with seat depth reducer option.
2) With seat depth reducer option: 80°–160°.
3) With back support angle limiter option: 80°–130°.
4)
May be limited by the push bar setting on the Kimba Home mobility base (470G71=900* Kimba).
5) Please note: The maximum user weight for the seating unit depends on the maximum load for the mobility base
that is being used. If the maximum user weight for the seating unit plus its own weight is greater than the maximum
load for the mobility base, the maximum allowable user weight for the seating unit is reduced accordingly.
50
Size 1
200–300
190
410–610
315–455
80–180
250/450
50
190–310
120–190
7)
40
7)
40
8)
7
580 x 370 x 420
1)
–310
2) 3) 4)
Size 2
260–350
240–400
560–700
390–560
3)
80–180
360/500
50
200–370
40
40
8.5
590 x 430 x 580
Kimba Neo