Mounting And Connecting The Hmi Device; Preparation For Mounting; Checking The Package Contents - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Mounting and connecting the HMI device

3.1

Preparation for mounting

Select the mounting location of the HMI device
Points to observe when selecting the mounting location:
● Position the HMI device so that it is not subjected to direct sunlight.
● Position the HMI device such that it is ergonomically accessible for the operator.
● Ensure that the HMI device air vents are not covered as a result of installation.
● Note the permissible mounting positions.
3.1.1

Checking the package contents

Check the package content for visible signs of transport damage and for completeness.
NOTICE
Damaged parts
A damaged part will cause the HMI device to malfunction.
Do not install parts damaged during shipment. In the case of damaged parts, contact your
Siemens representative.
Check the product package of the HMI device (see Product package (Page 15)).
Additional documents may be included in the delivery.
The documentation belongs to the HMI device and is required for subsequent
commissioning. Retain all enclosed documentation for the entire service life of the HMI
device. You must pass on the enclosed documentation to any subsequent owner or user of
the HMI device. Make sure that every supplement to the documentation that you receive is
stored together with the operating instructions.
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Choose a suitable mounting height.
3
29