Mounting The Device; Preparing For Installation; Check The Scope Of Delivery; Checking The Operating Conditions - Siemens SIMATIC TP900 Comfort INOX PCT Compact Operating Instructions

Mounting the device

3.1

Preparing for installation

3.1.1

Check the scope of delivery

Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
NOTICE
Damaged parts
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
3.1.2

Checking the operating conditions

Note the following aspects before installing the device:
1. Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
– Certificates and approvals (Page 33)
– Electromagnetic compatibility (Page 36)
2. Check the mechanical and climatic ambient conditions for operation of the device; see
Technical specifications (Page 33).
3. Follow the notes on use in the operating instructions.
3.1.3

Permitted mounting positions

The HMI device is suitable for installation in:
● Mounting cabinets
● Control cabinets
● Switchboards
● Consoles
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
3
19