Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 31

Mounting position
Select one of the approved mounting positions for your HMI device. The approved mounting
positions are described in the following sections.
Mounting in horizontal format
All HMI devices are suitable for horizontal mounting positions.
SIEMENS
A maximum ambient temperature of +50 °C is permissible for vertical mounting (0° tilt angle);
a maximum of +40 °C is permitted for inclined mounting.
The ambient temperature for TP1900 and TP2200 Comfort when installed vertically should
not exceed +45 °C.
Mounting in vertical format
The Touch HMI devices are also suitable for mounting in vertical format. Select the
appropriate screen format during configuration.
A maximum ambient temperature of +40 °C is permissible for vertical mounting (0° tilt angle);
a maximum of +35 °C is permitted for inclined mounting.
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Mounting and connecting the HMI device
3.1 Preparation for mounting
0 °C
0 °C
31