Unpacking And Connecting The Device; Safety Information - Siemens SIMATIC 870 V2 Quick Start Manual

Hide thumbs Also See for SIMATIC 870 V2:
Table of Contents

Advertisement

Unpacking and connecting the device

2.1

Safety Information

Electrical Connection
Warning
Unplug the device before every intervention and after disconnecting it from the power
supply.
Avoid contact with network lines and data transmission lines during thunderstorms, and do
not connect any lines during this time.
High frequency radiation
Caution
Unintentional operating situation
High frequency radiation, e.g. from cell phones, can cause unintentional operating situations
under some circumstances. For more details, consult the technical data in the "EMC
Requirements" chapter.
Handling and disposal of lithium batteries
Warning
Danger of explosion and the release of harmful substances!
Do not throw lithium batteries into fire, do not solder onto the cell body, do not open, do not
short circuit, do not reverse pole, do not heat above 100 °C, dispose of according to
regulations, and protect from direct sunlight, moisture and condensation.
Replace lithium batteries with the same brand or a brand recommended by the
manufacturer.
Dispose of used lithium batteries individually as hazardous waste in accordance with the
local regulations.
Panel PC 870 V2
QuickStart, Edition 03/2004, A5E00299738
2
2-1

Advertisement

Table of Contents
loading

Table of Contents